VW T-Cross C1 (2018+ ) / (Tacqua / Taigun)
T-Cross (C1) – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
T-Cross (C1) – Activate “Think Blue Monitor” mode
Purpose: Displays the “Think Blue Monitor” mode: “ECO MODE” graph for MIB2. Warning! There are 2 lines of coding to do here....
T-Cross (C1) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
T-Cross (C1) – Activate Driving School mode
Purpose: Adds a driving-school mode view to Discover, displaying turn signals, speed, etc. (also ideal for accompanied driving). Warning! There are 3...
T-Cross (C1) – Activate intruder alarm with horn
Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the...
T-Cross (C1) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
T-Cross (C1) – Activate Off-Road mode on Discover
Purpose: to add Offroad mode to Discover Pro or Discover Media with navigation. Warning! There are 3 lines of coding to do...
T-Cross (C1) – Activate rearview camera (retrofit)
Purpose: to activate the reversing camera after it has been retrofitted to the Discover. Proceed : 1 - Engine off, ignition off,...
T-Cross (C1) – Activate window operation with ignition off
Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...
T-Cross (C1) – Activate/deactivate daytime running lights (DRL) with Discover
Purpose: to activate/deactivate daytime running lights (DRL) from Discover in the CAR menu. ATTENTION to your country's regulations and technical inspection for...
T-Cross (C1) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
T-Cross (C1) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
T-Cross (C1) – Automatic keyless entry KESSY
Purpose: automatically locks the vehicle when you leave it with the key, provided the KESSY system (keyless entry/locking and starting system) is...
T-Cross (C1) – Changing the Virtual Cockpit display
Purpose: to modify and customize the Active Info Display / Virtual Cockpit. Depending on the setting, the display of the counter and/or...
T-Cross (C1) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
T-Cross (C1) – Compass display on ODB
Purpose: to display a compass on the ODB (on-board computer), if you have GPS navigation (NAV), and to change its position on...
T-Cross (C1) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the Trip Computer/Virtual Cockpit. Note: these changes affect the display of instantaneous consumption, average...
T-Cross (C1) – Daytime running light deactivation (DRL) using the handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
T-Cross (C1) – Deactivate “Switch on low beam” message
Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0. Proceed : 1 - Engine off,...
T-Cross (C1) – Deactivate MirrorLink
Purpose: To deactivate / remove MirrorLink from App-Connect on the Discover MIB. The Mirrorlink service is no longer available since June 1,...
T-Cross (C1) – Deactivate open door alarm using contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...
T-Cross (C1) – Deactivate rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
T-Cross (C1) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
T-Cross (C1) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. Proceed : 1 -...
T-Cross (C1) – Disable AM frequency on Discover
Purpose: to disable the AM radio frequency on Discover (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1 -...
T-Cross (C1) – Disable horn without ignition
Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...
T-Cross (C1) – Disable OPS warning message
Purpose: To deactivate the “Check Distance!” / “Please check surroundings” / “Look! Safe to move?” message which appears on Discover when parking...
T-Cross (C1) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
T-Cross (C1) – Fan speed display for air conditioning in Auto mode
Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode) Proceed : 1 - Engine...
T-Cross (C1) – Fender / Dynaudio logo at Discover start-up
Purpose: To display the Fender or Dynaudio logo when your Discover Media or Pro is launched. Procedure: 1 - Engine off, ignition...
T-Cross (C1) – Hill Start Assist
Purpose: to set Hill Start Assist operation. (hill-start assist) Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
T-Cross (C1) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
T-Cross (C1) – Interior lighting deactivated when trunk is opened
Purpose: deactivates interior lighting when only the trunk is opened. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
T-Cross (C1) – Key operation with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
T-Cross (C1) – Lane Assist activation
Purpose: to activate Lane Assist for vehicles with Sign Assist and/or Light Assist options. Vehicle must be equipped with 3Q0 or 2Q0...
T-Cross (C1) – Lane Assist settings
Purpose: Adjusts lane departure warning, driver inactivity deactivation threshold, steering assist intensity and steering wheel vibration intensity. Procedure: 1 - Engine off,...
T-Cross (C1) – Lap Timer
Purpose: to add the stopwatch to the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
T-Cross (C1) – Light Assist activation
Purpose: to activate the high beam assistant for vehicles with Sign Assist and/or Lane Assist options. Vehicle must be equipped with 3Q0...
T-Cross (C1) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. Proceed : 1...
T-Cross (C1) – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
T-Cross (C1) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
T-Cross (C1) – Mirror folding adjustment with remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
T-Cross (C1) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :...
T-Cross (C1) – ODB make-up quantity display
Purpose: Displays the amount of fuel used since refueling on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect...
T-Cross (C1) – Oil temperature on ODB
Purpose: to display oil temperature on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
T-Cross (C1) – R logo on Virtual Cockpit
Purpose: to display an R logo on the Active Info Display / Virtual Cockpit. (For AID v2) Procedure: 1 - Engine off,...
T-Cross (C1) – Radar deactivation speed (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
T-Cross (C1) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting) Proceed : 1 - Engine...
T-Cross (C1) – Retain exterior lighting with mirrors folded down
Purpose: to maintain exterior lighting with mirrors folded down. Warning! There are 2 lines of coding to do here. Proceed : 1...
T-Cross (C1) – Set ACC control in 1 km/h increments
Purpose: to adjust the ACC distance setting from the factory setting so that it can be set in 1 km/h increments by...
T-Cross (C1) – Sign display on ODB
Purpose: displays speed limit signs on the ODB/Virtual Cockpit (Sign Assist) Vehicle must be equipped with 3Q0 camera Warning! There are 9...
T-Cross (C1) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...
T-Cross (C1) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...
T-Cross (C1) – Third brake light on when trunk is open
Purpose: to keep the 3rd brake light on if the trunk is not fully closed. For security lighting at night or to...
T-Cross (C1) – Windows close automatically when locked
Purpose: automatically closes the windows when the car is locked. A new menu will be activated in door settings to deactivate the...