VW Polo 5 MK5 (6R) (2009-2014) / Polo 5 6R GTI / R WRC
Polo 5 (6R) – Activate Bluetooth for RNS 315
Purpose: to activate Bluetooth on the RNS 315. ATTENTION: Not all RNS-315 are equipped with a Bluetooth module. Module compatibility list3C0 035...
Polo 5 (6R) – Activate comfort turn signals
Purpose: to activate the comfort indicators. (By default, the number of flashes is 3. This value can be changed between 1 and...
Polo 5 (6R) – Activate daytime running lights (DRL)
Purpose: to activate the daytime running lights (DRL). Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Polo 5 (6R) – Activate Driving School mode (RCD 210/RCD 310)
Purpose: Allows you to add a Driving School mode view to the RCD 210, RCD 310 that displays turn signals, speed ......
Polo 5 (6R) – Activate heated mirrors (retrofit)
Purpose: to activate heated and heated mirrors. The vehicle must be equipped with heated rearview mirror glass. Or for retrofit installation of...
Polo 5 (6R) – Activate interior lighting when key is removed
Purpose: to activate the interior lighting when the key is removed from the neiman. Procedure: 1 - Engine off, ignition off, connect...
Polo 5 (6R) – Activate rain sensor
Purpose: to activate the rain sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer,...
Polo 5 (6R) – Activate RNS 510 voice control
Purpose: to activate voice control on the RNS 510 (SDS). ATTENTION: RNS 510 firmware must be version v2660. Activating voice control brings...
Polo 5 (6R) – Activate wiper change mode
Purpose: activates changeover mode for front wipers. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Polo 5 (6R) – Adjusting light sensor sensitivity
Purpose: Adjusts the sensitivity of the light sensor. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Polo 5 (6R) – Automatic closing of windows and roof in case of rain
Purpose: Automatically closes windows and sunroof when it rains. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Polo 5 (6R) – Automatic door locking after 30s
Purpose: to set automatic door unlocking when the vehicle has been unlocked but no doors have been opened for 30 seconds. Procedure:...
Polo 5 (6R) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Polo 5 (6R) – Automatic door unlocking
Purpose: to configure automatic door unlocking when the ignition key is removed. Procedure: 1 - Engine off, ignition off, connect your official...
Polo 5 (6R) – Automatic headlamp activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Polo 5 (6R) – Change number of flashes (comfort flashers)
Purpose: to change the number of flashes after activating the comfort indicators. Proceed : 1 - Engine off, ignition off, connect your...
Polo 5 (6R) – Change ODB language
Purpose: Select the language of your on-board computer. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Polo 5 (6R) – Change the RCD/RNS 510 theme
Purpose: to change the display theme of the RCD 510 and RNS 510. Procedure: 1 - Engine off, ignition off, connect your...
Polo 5 (6R) – Change the RCD/RNS OPS image
Purpose: to change the vehicle image of the OPS (parking aid) on the RCD 510/330/360/440 and RNS 315/510. Procedure: 1 - Engine...
Polo 5 (6R) – Coming / Leaving Home with fog lamps
Purpose: Enables fog lamps to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your...
Polo 5 (6R) – Coming / Leaving Home with Xenons
Purpose: Allows xenon (or halogen) lights to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off,...
Polo 5 (6R) – Coming-Home / Leaving-Home activation
Purpose: To activate Coming-Home / Leaving-Home. (To work properly, the vehicle must be equipped with a light sensor. Headlight switch must be...
Polo 5 (6R) – Confirmation of door locking/unlocking (turn signals)
Purpose: Used to set up confirmation of door locking using the indicators. Procedure: 1 - Engine off, ignition off, connect your official...
Polo 5 (6R) – Corner lights
Purpose: to activate cornering lights with fog lamps. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Polo 5 (6R) – Corner lights (with turn signal)
Purpose: to activate cornering lights with fog lamps when the turn signal is activated. Proceed : 1 - Engine off, ignition off,...
Polo 5 (6R) – Deactivate brake pad warning light
Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...
Polo 5 (6R) – Deactivate horn without ignition
Purpose: to deactivate the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Polo 5 (6R) – Deactivate rear wiper when reversing
Purpose: to deactivate the automatic engagement of the rear wiper when reversing. Procedure: 1 - Engine off, ignition off, connect your official...
Polo 5 (6R) – Deactivate windshield washer indicator
Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...
Polo 5 (6R) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Polo 5 (6R) – Dimming LEDs with turn signals
Purpose: to maintain LED intensity with indicators. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Polo 5 (6R) – Disable Bluetooth connection beep
Purpose : Disables the beep when a device successfully connects to the car radio's Bluetooth. Procedure : 1 - Engine off, ignition...
Polo 5 (6R) – Disable parking aid beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Proceed : 1 - Engine...
Polo 5 (6R) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Procedure: 1 - Engine off, ignition off, connect your official...
Polo 5 (6R) – Enable Bluetooth audio (A2DP)
Purpose : Enables Bluetooth audio (A2DP). You can listen to music from your A2DP-compatible phone or mp3 player. Procedure : 1 -...
Polo 5 (6R) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Polo 5 (6R) – Fog lamps with high beam
Purpose: to deactivate the fog lamps when the high beam is switched on, so that they don't go out when the high...
Polo 5 (6R) – Hill Hold Control
Purpose: to activate Hill Hold Control. Hill Hold Control maintains brake pressure for a few seconds after prolonged application of the brake...
Polo 5 (6R) – Make-up quantity displayed on ODB
Purpose: to display the amount of fuel topped up on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off,...
Polo 5 (6R) – Needle check
Purpose: activates needle sweep when the car is started. (Needle Sweep) ATTENTION: Only compatible with models since 2012 (Compatible module: 6R0 920...
Polo 5 (6R) – Opening/closing windows with remote control
Purpose: to activate closing and opening of windows and sunroof with remote control. Procedure: 1 - Engine off, ignition off, connect your...
Polo 5 (6R) – OPS speed camera display on car radio screen
Purpose: Enables the display of OPS speed cameras on the car radio screen. Please note: The vehicle must be equipped with a...
Polo 5 (6R) – Park assist beep frequency setting
Purpose: to set the frequency of rear beeps during parking assistance. Proceed : 1 - Engine off, ignition off, connect your official...
Polo 5 (6R) – Selective door unlocking
Purpose: Used to set up selective door unlocking. When unlocking the vehicle, only the driver's door is unlocked. To unlock all doors,...
Polo 5 (6R) – Speed limit display RNS 510
Purpose : to display the speed limit on the RNS 510 navigation screen. Procedure: 1 - Engine off, ignition off, connect your...
Polo 5 (6R) – Suppress ODB error (LED license plate light)
Purpose: Eliminates the error on the ODB when replacing original license plate light bulbs with non-error LEDs. Proceed : 1 - Engine...
Polo 5 (6R) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...