VW Passat B7 (3C Facelift) (2010-2015)
Passat (B7) – Activate Bluetooth on RNS 315
Purpose: to activate Bluetooth on the RNS 315. ATTENTION: Not all RNS-315 are equipped with a Bluetooth module. Module compatibility list3C0 035...
Passat (B7) – Activate Coming / Leaving Home
Purpose: Activates Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Passat (B7) – Activate daytime running lights (DRL) only with headlight switch in Auto position
Purpose: to activate daytime running lights (DRL) only when the light switch is in Auto position. Procedure: 1 - Engine off, ignition...
Passat (B7) – Activate mood lighting
Purpose: to activate ambient lighting. (After wiring and lighting installation for retrofitting) Procedure : 1 - Engine off, ignition off, connect your...
Passat (B7) – Activate rearview camera (retrofit)
Purpose: to activate the reversing camera after installation on the RCD 510/330/360/440 and RNS 315/510 (retrofit). Proceed : 1 - Engine off,...
Passat (B7) – Activate RNS 510 (retrofit)
Purpose: To enable installation of the RNS 510 to replace the original RCD-310 (retrofit). Procedure: 1 - Engine off, ignition off, connect...
Passat (B7) – Activate RNS 510 voice control
Purpose: to activate voice control on the RNS 510 (SDS). ATTENTION: RNS 510 firmware must be version v2660. Activating voice control brings...
Passat (B7) – Add daytime running lights (DRL) to ODB
Purpose: to add DRL activation/deactivation to the ODB (MFA). (2011+) Procedure : 1 - Engine off, ignition off, connect your official VAG-COM...
Passat (B7) – Add mirror adjustment to ODB
Purpose: to add the mirror adjustment menu, synchronize or individual in the ODB (MFA). (2011+) Procedure : 1 - Engine off, ignition...
Passat (B7) – Adjusting the volume of the reversing beep
Purpose: to adjust the volume of the reversing beep. Procedure : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Passat (B7) – Automatic closing of windows and roof in the event of rain
Purpose: Automatically closes windows and sunroof when it rains. The vehicle must be locked with the remote control for this to work....
Passat (B7) – Automatic folding of mirrors
Purpose: Automatically folds mirrors when vehicle is locked. For 4th generation door modules (models from 2013) activation is possible with VCDS VAG-COM...
Passat (B7) – Automatic headlight activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Passat (B7) – Change RCD/RNS 510 theme
Purpose: to change the display theme of the RCD 510 and RNS 510. Procedure: 1 - Engine off, ignition off, connect your...
Passat (B7) – Change the RCD/RNS OPS image
Purpose: to change the vehicle image of the OPS (parking aid) on the RCD 510/330/360/440 and RNS 315/510. Procedure: 1 - Engine...
Passat (B7) – Comfort blinker
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Passat (B7) – Coming / Leaving Home with fog lamps
Purpose: Enables fog lamps to be used for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect your...
Passat (B7) – Coming / Leaving Home with Xenons
Purpose: Activates xenon headlamps instead of fog lamps for Coming Home and Leaving Home. Procedure: 1 - Engine off, ignition off, connect...
Passat (B7) – Complete opening of sunroof with remote control
Purpose: Allows the sunroof to be opened fully when opening with the remote control. Procedure: 1 - Engine off, ignition off, connect...
Passat (B7) – Corner Lights activation
Purpose: to activate cornering lights with fog lamps. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Passat (B7) – Corner Lights in reverse
Purpose: to activate the cornering lights with the fog lamps when reversing. Procedure : 1 - Engine off, ignition off, connect your...
Passat (B7) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the on-board computer. Modification only possible on Mid/High range models. Note: modifications affect the...
Passat (B7) – Deactivate brake pad warning light
Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...
Passat (B7) – Deactivate windshield washer indicator
Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...
Passat (B7) – Deactivate/activate electric handbrake for rear brake pad change
Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (EPB reset / Lining...
Passat (B7) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Passat (B7) – Disable Bluetooth connection beep
Purpose : Disables the beep when a device successfully connects to the car radio's Bluetooth. Procedure : 1 - Engine off, ignition...
Passat (B7) – Door lighting (retrofit)
Purpose: Enables door lighting to be activated after retrofitting. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Passat (B7) – Electric tailgate closure with remote control
Purpose: to close the electric tailgate with the remote control. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Passat (B7) – Electronic differential lock (XDS)
Purpose: to activate the electronic differential lock (XDS). The Electronic Differential Lock (XDS) is an extension of the familiar EDS function.XDS does...
Passat (B7) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Passat (B7) – Hill Hold Control
Purpose: to activate Hill Hold Control. Hill Hold Control maintains brake pressure for a few seconds after prolonged application of the brake...
Passat (B7) – Maintain LED intensity with turn signals
Purpose: to maintain LED intensity with indicators. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Passat (B7) – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
Passat (B7) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Needle Sweep) Information : If your meter is...
Passat (B7) – Passenger mirror down when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...
Passat (B7) – Speed limit display RNS 510
Purpose : to display the speed limit on the RNS 510 navigation screen. Procedure: 1 - Engine off, ignition off, connect your...
Passat (B7) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Only compatible with Gateway 7N0! Temperature deactivation method. Proceed : 1 - Engine off, ignition...
Passat (B7) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...
Passat (B7) – Top-up quantity display on ODB
Purpose: to display the amount of fuel topped up on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off,...