SUPERB (3V) - VAG Coding

VAG Coding VCDS ODBeleven Skoda Superb 3V

Skoda Superb 3 (3V) (2015-2023) / Superb 3 Facelift (specific facelift coding at bottom of page)

Superb (3V) – 120 km/h overtaking alert

Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Warning: on some 2016 models...

Superb (3V) – Activate “Green Score Monitor” mode

Purpose: Displays the “Green Score Monitor” mode: “ECO MODE” graph on the MIB2. Warning! There are 2 lines of coding to do...

Superb (3V) – Activate AirCare memory function

Purpose: to activate the AirCare function's air-conditioning memory. In the factory setting, this is deactivated when you leave the vehicle. Once set,...

Superb (3V) – Activate daytime running lights (DRL) only in Auto position

Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...

Superb (3V) – Activate driver profile customization

Purpose: to activate driver profiles on the ODB and MIB screens, to be selected according to the driver. The profile stores the...

Superb (3V) – Activate Driving School mode

Purpose: Adds a driving-school mode view to the screen, displaying indicators, speed, etc. (also ideal for accompanied driving). Warning! There are 3...

Superb (3V) – Activate fog lamps as daytime running lights (DRL)

Purpose: to activate daytime running lights (DRL) with fog lamps. Warning! There are 2 lines of coding to do here. Proceed :...

Superb (3V) – Activate halogen exterior lights with turn signals

Purpose: activates the exterior rear lights (halogen) at the same time as the indicators. Warning! There are 6 lines of coding to...

Superb (3V) – Activate intruder alarm with horn

Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the...

Superb (3V) – Activate Lane Assist memory function

Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...

Superb (3V) – Activate Off-Road mode

Purpose: to add Offroad mode to the Columbus MIB screen with navigation. Warning! There are 3 lines of coding to do here....

Superb (3V) – Activate parking lights on both sides

Purpose: activates the parking lights on both sides of the vehicle, instead of the default single-side activation via the turn signal switch....

Superb (3V) – Activate rearview camera (retrofit)

Purpose: To activate the rearview camera after installation (retrofit camera Low or High). Procedure: 1 - Engine off, ignition off, connect your...

Superb (3V) – Activate speedometer lighting with parking lights

Purpose: to activate the instrument cluster lighting when the parking/position lights are switched on. Proceed : 1 - Engine off, ignition off,...

Superb (3V) – Activate trailer hitch (retrofit)

Purpose: Enables trailer / towbar retrofit. Please note! Adaptation in motor control unit 01 is not accepted for some models. In this...

Superb (3V) – Activate window operation with ignition off

Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...

Superb (3V) – Activate/deactivate windshield wipers on key removal

Purpose: to activate windshield wiper stop when the key is removed (wipers stop directly in the position they were in) or to...

Superb (3V) – Activation of automatic summer/winter time changeover

Purpose: Enables automatic time change on the MIB. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...

Superb (3V) – Activation of progressive interior lighting

Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...

Superb (3V) – Adjusting the Soundaktor volume

Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...

Superb (3V) – Automatic door unlocking with DSG in “P” position

Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...

Superb (3V) – Automatic headlamp activation from 140 km/h

Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...

Superb (3V) – Automatically folding mirrors

Purpose: Automatically folds mirrors when vehicle is locked. The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)”...

Superb (3V) – Brake disc drying

Purpose: to adjust the intensity of brake disc drying. If your car has a tendency to squeal when parked in wet weather,...

Superb (3V) – Change ODB language

Purpose: Select the language of your on-board computer. Perfect if you're importing your Superb. Proceed : 1 - Engine off, ignition off,...

Superb (3V) – Change startup logo on screen

Purpose: To display another logo when your Bolero / Amundsen / Columbus car radio is launched. Proceed : 1 - Engine off,...

Superb (3V) – Change warning thresholds for icy conditions

Goal: Select the outdoor temperature value for icy conditions for which the warning is displayed on the dashboard. (Ice Warning) Proceed :...

Superb (3V) – Comfort turn signal

Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...

Superb (3V) – Coming / Leaving Home with daytime running lights (DRL)

Purpose: Allows use of daytime running lights (DRL) for Coming Home and Leaving Home. (Warning: test coding, save your original code) Warning!...

Superb (3V) – Coming / Leaving Home with fog lamps

Purpose: To use the fog lamps for Coming Home and Leaving Home. Proceed : 1 - Engine off, ignition off, connect your...

Superb (3V) – Coming / Leaving Home with fog lamps, Xenon and LEDs

Goal: Add fog lamps for Coming Home and Leaving Home in addition to LEDs and Xenon. Warning! There are 5 lines of...

Superb (3V) – Coming Home automatic

Purpose: Automatically activates the Coming Home function (no need to make a headlight call). Proceed : 1 - Engine off, ignition off,...

Superb (3V) – Coming Home on opening the driver’s door

Purpose: Starts Coming Home when the driver's door is opened, not when the ignition key is removed. Proceed : 1 - Engine...

Superb (3V) – Compass display on ODB

Purpose: to display a compass on the ODB (on-board computer), if you have GPS navigation (NAV), and to change its position on...

Superb (3V) – Contactless headlight activation

Purpose: enables headlight flashes to be made even when the ignition is off. Proceed : 1 - Engine off, ignition off, connect...

Superb (3V) – Corner Lights activation

Purpose: to activate Corner Lights with fog lamps. Warning! There are 6 lines of coding to do here. Proceed : 1 -...

Superb (3V) – Corner Lights with turn signals

Purpose: to activate the Corner Lights on the side where the flasher is activated. Proceed : 1 - Engine off, ignition off,...

Superb (3V) – Correction of ODB consumption display

Purpose: to correct the fuel consumption display on the Trip Computer/Virtual Cockpit. Note: these changes affect the display of instantaneous consumption, average...

Superb (3V) – Daytime running light deactivation (DRL) with handbrake

Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...

Superb (3V) – Daytime running lights (DRL) on/off via display

Purpose: To activate / deactivate the daytime running lights (DRL) from the Columbus / Amundsen. ATTENTION to your country's regulations and technical...

Superb (3V) – Daytime running lights Eyelashes always on

Purpose: activates the “Eyelashes” daytime running lights so that they always stay on (DRL stripe). Watch out! There are 4 lines of...

Superb (3V) – Deactivate brake pad warning light

Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...

Superb (3V) – Deactivate driving mode selection LED

Purpose: to deactivate the LED display when DriveMode Eco, Sport or Individual is set. The center console button LED is off in...

Superb (3V) – Deactivate ESP

Purpose: to deactivate ESP and/or add Sport ESC mode from the display. Proceed : 1 - Engine off, ignition off, connect your...

Superb (3V) – Deactivate horn without ignition

Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...

Superb (3V) – Deactivate MirrorLink

Purpose: deactivates / removes MirrorLink from SmartLink on the MIB. The Mirrorlink service is no longer available since June 1, 2020 on...

Superb (3V) – Deactivate open door alarm with contact

Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...

Superb (3V) – Deactivate rear fog light warning

Purpose: to deactivate the warning message on the dashboard, which will remind you to turn on the rear fog lights when you...

Superb (3V) – Deactivate/activate electric handbrake for rear brake pad change

Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (Lining change mode) Proceed...

Superb (3V) – Deactivation of Corner Lights when reversing

Purpose: to deactivate the Corner Lights (AFS) when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...

Superb (3V) – Deactivation of parking aid activation beep

Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...

Superb (3V) – Delete belt alarm

Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1 -...

Superb (3V) – Delete LED light bulb error

Purpose: To suppress the ODB error after installation of LED plate lights. Warning! There are 2 lines of coding to do here....

Superb (3V) – Disable AM frequency

Purpose: to disable the AM radio frequency on the display (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1...

Superb (3V) – Disable audio reduction for parking aid

Purpose: deactivates sound reduction when reverse gear is engaged or parking aid is activated manually. Procedure: 1 - Engine off, ignition off,...

Superb (3V) – Display of fan speed on A/C in Auto mode

Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode) Proceed : 1 - Engine...

Superb (3V) – Door lock/unlock confirmation (beep/horn)

Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....

Superb (3V) – Driving Mode on ODB

Purpose: Displays the driving mode selection on the ODB. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Superb (3V) – Electric tailgate closure with button

Purpose : to close the electric tailgate using the button on the driver's door. Proceed : 1 - Engine off, ignition off,...

Superb (3V) – Electric tailgate closure with remote control

Purpose: to close the electric tailgate with the remote control. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...

Superb (3V) – Electronic differential lock (XDS)

Purpose: to set the electronic differential lock (XDS) The electronic differential lock (XDS) is an extension of the well-known EDS function. XDS...

Superb (3V) – Enable CD/DVD extraction

Purpose: activates the function for copying multimedia data (music, films, etc.), similar to the SD card function. Allows you to import /...

Superb (3V) – Flash mode lights during emergency braking

Purpose: activates flashing lights during emergency braking. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Superb (3V) – Fold down mirrors with ignition on

Purpose: Enables automatic folding of mirrors when the ignition is switched on, rather than when the vehicle is locked. The vehicle must...

Superb (3V) – Full sunroof opening with remote control

Purpose: Allows the sunroof to open fully when opening with the remote control. Proceed : 1 - Engine off, ignition off, connect...

Superb (3V) – Headlamp flash with fog lamps

Purpose: Allows fog lamps to be used in addition to high beam. Warning! There are 2 lines of coding to do here,...

Superb (3V) – Headlamp washer settings (Xenon)

Purpose: to manage the number of manual activations before the headlamp washer is activated on Xenon / to set the delay time...

Superb (3V) – Hill Start Assist

Purpose: to set Hill Start Assist operation. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...

Superb (3V) – Increase gas pedal sensitivity

Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...

Superb (3V) – Increase the distance between curb and car (Park Assist)

Purpose: to set the distance between the kerb and the car during Park Assist. Proceed : 1 - Engine off, ignition off,...

Superb (3V) – Interior lighting deactivated when trunk is opened

Purpose: deactivates interior lighting when only the trunk is opened. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...

Superb (3V) – KESSY automatic keyless entry

Purpose: automatically locks the vehicle when you leave it with the key, provided the KESSY system (keyless entry/locking and starting system) is...

Superb (3V) – Key operation even with ignition on

Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...

Superb (3V) – Lane Assist activation

Purpose: to activate Lane Assist for vehicles with Sign Assist and/or Light Assist options. Vehicle must be fitted with camera Ref 5Q0,...

Superb (3V) – Lane Assist settings

Purpose: Adjusts lane departure warning, driver inactivity deactivation threshold, steering assist intensity and steering wheel vibration intensity. Procedure: 1 - Engine off,...

Superb (3V) – Lap Timer

Purpose: to add the stopwatch to the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Superb (3V) – License plate illumination, open trunk

Purpose: turns on license plate illumination when trunk / tailgate is open. Warning! There are 3 lines of coding to do here....

Superb (3V) – Light Assist activation

Purpose: to activate the high beam assistant for vehicles with the Sign Assist or Lane Assist option. Vehicle must be equipped with...

Superb (3V) – Light Assist always active

Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. Proceed : 1...

Superb (3V) – Light Assist settings

Purpose: to set the speed thresholds for activation/deactivation of the high beam assistant (light assist). Information: no longer works on Superb Facelift...

Superb (3V) – Lock CD/DVD eject button

Purpose: locks/unlocks the CD/DVD eject button. Protection against CD theft. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Superb (3V) – Lower passenger mirror when reversing

Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R”, and the function must be activated...

Superb (3V) – Make-up quantity display on ODB

Purpose: Displays the amount of fuel used since refueling on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect...

Superb (3V) – Memory for heated seats

How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...

Superb (3V) – Microphone sensitivity adjustment

Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...

Superb (3V) – Mirror folding adjustment with remote control

Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...

Superb (3V) – Modify power steering hardness

Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic). Warning:...

Superb (3V) – Needle check

Purpose: to activate the scanning of the speedometer needles when the vehicle is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :...

Superb (3V) – ODB battery charge level

Purpose: Displays battery charge level on the ODB (on-board computer). Handling procedure : 1 - Switch off the ignition 2 - Press...

Superb (3V) – ODB Carbon Look

Purpose: Activates the “Carbon” display on the ODB screen. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Superb (3V) – Oil temperature on ODB

Purpose: to display oil temperature on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Superb (3V) – Opening/closing windows with KESSY

Purpose: to activate closing and opening of windows and sunroof with the KESSY keyless entry system, keep pressing the handle until the...

Superb (3V) – Panel display on ODB

Purpose: displays speed limit signs on the ODB. (Sign Assist) The vehicle must be equipped with the 5Q0 camera. Warning! There are...

Superb (3V) – Power tailgate beeper suppression

Purpose: to deactivate beeps when opening/closing the trunk/electric liftgate. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...

Superb (3V) – Radar deactivation speed (or reversing camera)

Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...

Superb (3V) – Rear lights activated with daytime running lights (DRL)

Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) Attention! There are 1 or 8 lines of coding to do...

Superb (3V) – Reprogramming a new battery

Purpose: to reprogram / recode the new battery of all its data after replacement. Warning! There are 5 lines of coding to...

Superb (3V) – Retain exterior lighting with mirrors folded down

Purpose: to maintain exterior lighting with mirrors folded down when opening/closing. Warning! There are 2 lines of coding to do here. Proceed...

Superb (3V) – Speed threshold settings for cornering light activation

Purpose: to set the speed thresholds for turning on and off the cornering lights via the fog lights. (Corner Lights) Warning! There...

Superb (3V) – Start/Stop deactivation

Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...

Superb (3V) – Tear Wiping

Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...

Superb (3V) – Temperature in degrees Celsius or Fahrenheit

Purpose: Selects the format in which the temperature is displayed on the instrument cluster (ODB in Celsius (C°) or Fahrenheit (F°)). Proceed...

Superb (3V) – Third brake light on when trunk is open

Purpose: to keep the 3rd brake light on if the trunk is not fully closed. For security lighting at night or to...

Superb (3V) – Turn on Corner Lights in reverse

Purpose: to activate the Corner Lights (AFS) in reverse. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...

Superb (3V) – Vehicle Hold Assist

Purpose: To set the memory of the Auto Hold button (A) - the Auto Hold function can be set to be always...

Superb (3V) – Xenon presentation mode

Purpose : activates xenon light kinematics when the vehicle is started. (DLA presentation) Procedure: 1 - Engine off, ignition off, connect your...

VAG Coding VCDS ODBeleven Skoda Superb 3V facelift

Skoda Superb 3 (3V) Facelift (2019-2023)

List of new Skoda Superb 3V codings

OBDeleven One-Click Apps Skoda Superb 3V List