Skoda Karoq NU (2017+)
Karoq (NU) – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
Karoq (NU) – Activate “Green Score Monitor” mode
Purpose: Displays the “Green Score Monitor” mode: “ECO MODE” graph on the MIB2. Warning! There are 2 lines of coding to do...
Karoq (NU) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
Karoq (NU) – Activate driver profile customization
Purpose: to activate driver profiles on the ODB or Virtual Cockpit and on the MIB screen, to be selected according to the...
Karoq (NU) – Activate Driving School mode
Purpose: Adds a driving-school mode view to the screen, displaying indicators, speed, etc. (also ideal for accompanied driving). Warning! There are 3...
Karoq (NU) – Activate intruder alarm with horn
Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the...
Karoq (NU) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
Karoq (NU) – Activate Off-Road mode
Purpose: to add Offroad mode to the MIB screen with navigation. Warning! There are 3 lines of coding to do here. Proceed...
Karoq (NU) – Activate parking lights on both sides
Purpose: activates the parking lights on both sides of the vehicle, instead of the default single-side activation via the turn signal switch....
Karoq (NU) – Activate reversing camera (retrofit)
Purpose: To activate the rearview camera after installation (retrofit camera Low or High). Procedure: 1 - Engine off, ignition off, connect your...
Karoq (NU) – Activate speedometer lighting with parking lights
Purpose: to activate the instrument cluster lighting when the parking/position lights are switched on. Proceed : 1 - Engine off, ignition off,...
Karoq (NU) – Activate trailer hitch (retrofit)
Purpose: Enables trailer / towbar retrofit. Please note! Adaptation in motor control unit 01 is not accepted for some models. In this...
Karoq (NU) – Activate window operation with ignition off
Purpose: activates window operation (close/open) with ignition off and door open. Proceed : 1 - Engine off, ignition off, connect your official...
Karoq (NU) – Activate/deactivate daytime running lights (DRL) via display
Purpose: to activate/deactivate daytime running lights (DRL) from the CAR menu. ATTENTION to your country's regulations and technical inspection for daytime running...
Karoq (NU) – Activate/deactivate windshield wipers on key removal
Purpose: to activate windshield wiper stop when the key is removed (wipers stop directly in the position they were in) or to...
Karoq (NU) – Activation of High Beam Assist (Light Assist)
Purpose: to activate the high beam assistant for vehicles with Sign Assist and/or Lane Assist options. Vehicle must be equipped with 3Q0...
Karoq (NU) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
Karoq (NU) – Adjusting the Soundaktor volume
Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...
Karoq (NU) – Ambient Light Activation (colors)
Purpose: to activate the Ambient Light option on your MIB for changing screen and Virtual Cockpit colors (depending on your MIB version,...
Karoq (NU) – Automatic door unlocking with DSG in “P” position
Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”. Procedure: 1- Engine off, ignition off, connect your...
Karoq (NU) – Automatically folding mirrors
Purpose: Automatically folds mirrors when vehicle is locked. The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)”...
Karoq (NU) – Battery charge level on ODB
Purpose: Displays battery charge level on the ODB (on-board computer). Handling procedure : 1 - Switch off the ignition 2 - Press...
Karoq (NU) – Change ODB language
Purpose: Select the language of your on-board computer. Perfect if you're importing your Karoq. Proceed : 1 - Engine off, ignition off,...
Karoq (NU) – Comfort flashing light
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Karoq (NU) – Compass display on ODB
Purpose: to display a compass on the ODB (on-board computer), if you have GPS navigation (NAV), and to change its position on...
Karoq (NU) – Corner Lights in reverse
Purpose: to activate the Corner Lights (AFS) in reverse. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Karoq (NU) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the Trip Computer/Virtual Cockpit. Note: these changes affect the display of instantaneous consumption, average...
Karoq (NU) – Daytime running light deactivation (DRL) with handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
Karoq (NU) – Deactivate “Switch on low beam” message
Purpose: to deactivate the low beam warning message/dialogue when the headlight switch is in position 0. Proceed : 1 - Engine off,...
Karoq (NU) – Deactivate coupling between roller blind and sunroof
Purpose: cancels the coupling of roller blinds and panoramic sunroofs, allowing them to be adjusted separately. Procedure: 1 - Engine off, ignition...
Karoq (NU) – Deactivate driving mode selection LED
Purpose: to deactivate the LED display when DriveMode Eco, Sport or Individual is set. The center console button LED is off in...
Karoq (NU) – Deactivate ESP
Purpose: to deactivate ESP and/or add Sport ESC mode from the display. Proceed : 1 - Engine off, ignition off, connect your...
Karoq (NU) – Deactivate horn without ignition
Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...
Karoq (NU) – Deactivate MirrorLink
Purpose: deactivates / removes MirrorLink from SmartLink on the MIB. The Mirrorlink service is no longer available since June 1, 2020 on...
Karoq (NU) – Deactivate open door alarm with ignition
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...
Karoq (NU) – Deactivate rear fog light warning
Purpose: to deactivate the warning message on the dashboard, which will remind you to turn on the rear fog lights when you...
Karoq (NU) – Deactivate rear wiper when reversing
Purpose: deactivates or reverses the rear wiper when reverse gear is engaged. Proceed : 1 - Engine off, ignition off, connect your...
Karoq (NU) – Deactivate roller blind when locking/unlocking
Purpose: To deactivate the roller blind comfort function when locking/unlocking. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Karoq (NU) – Deactivate/activate electric handbrake for rear brake pad change
Purpose: to deactivate/activate the electric handbrake in maintenance mode in order to change/replace the rear brake pad/disc linings. (Lining change mode) Proceed...
Karoq (NU) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
Karoq (NU) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. Proceed : 1 -...
Karoq (NU) – Delete power tailgate beeps
Purpose: to deactivate beeps when opening/closing the trunk/electric liftgate. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Karoq (NU) – Disable AM frequency
Purpose: to disable the AM radio frequency on the display (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1...
Karoq (NU) – Disable audio reduction for parking aid
Purpose: deactivates sound reduction when reverse gear is engaged or parking aid is activated manually. Procedure: 1 - Engine off, ignition off,...
Karoq (NU) – Display of fan speed on air conditioning in Auto mode
Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode) Proceed : 1 - Engine...
Karoq (NU) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
Karoq (NU) – Easy Entry
Purpose: automatically retracts the electric driver's seat when the ignition is switched off and the door is opened (access aid). This option...
Karoq (NU) – Electronic differential lock (XDS)
Purpose: to set the electronic differential lock (XDS) The electronic differential lock (XDS) is an extension of the well-known EDS function. XDS...
Karoq (NU) – Flash mode lights during emergency braking
Purpose: activates flashing lights during emergency braking. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Karoq (NU) – Front Assist settings
Purpose: activates the distance control on the screen menu, to adjust Front Assist parameters. Information: This setting is only possible if the...
Karoq (NU) – Full sunroof opening with remote control
Purpose: Allows the sunroof to open fully when opening with the remote control. Proceed : 1 - Engine off, ignition off, connect...
Karoq (NU) – Hill Start Assist
Purpose: to set Hill Start Assist operation. (hill-start assist) Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Karoq (NU) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
Karoq (NU) – Interior lighting deactivated when trunk is opened
Purpose: deactivates interior lighting when only the trunk is opened. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Karoq (NU) – Key operation even with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
Karoq (NU) – Lane Assist activation
Purpose: to activate Lane Assist for vehicles with Sign Assist and/or Light Assist options. Vehicle must be equipped with 3Q0 or 2Q0...
Karoq (NU) – Lane Assist settings
Purpose: Adjusts lane departure warning, driver inactivity deactivation threshold, steering assist intensity and steering wheel vibration intensity. Procedure: 1 - Engine off,...
Karoq (NU) – Lap Timer
Purpose: to add the stopwatch to the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Karoq (NU) – License plate illumination, open trunk
Purpose: turns on license plate illumination when trunk / tailgate is open. Warning! There are 3 lines of coding to do here....
Karoq (NU) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. Proceed : 1...
Karoq (NU) – Make-up quantity displayed on ODB
Purpose: Displays the amount of fuel used since refueling on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect...
Karoq (NU) – Memory for heated seats
How it works : When you switch on the heated seat(s), as soon as you remove the key from the ignition the...
Karoq (NU) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Karoq (NU) – Mirror folding adjustment with remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
Karoq (NU) – Modify power steering hardness
Purpose: to adjust the hardness of the power steering for a softer steering wheel (Comfort) or a harder sporty one (Dynamic). Warning:...
Karoq (NU) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :...
Karoq (NU) – Oil temperature on ODB
Purpose: to display oil temperature on the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Karoq (NU) – Panel display on ODB / Virtual Cockpit
Purpose: displays speed limit signs on the ODB/Virtual Cockpit (Sign Assist) Vehicle must be equipped with 3Q0 camera Warning! There are 9...
Karoq (NU) – Radar deactivation speed (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
Karoq (NU) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) (This method activates the dashboard lighting) Proceed : 1 - Engine...
Karoq (NU) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Watch out! There are 4 lines of coding...
Karoq (NU) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...
Karoq (NU) – Temperature in degrees Celsius or Fahrenheit
Purpose: Selects the format in which the temperature is displayed on the instrument cluster (ODB in Celsius (C°) or Fahrenheit (F°)). Proceed...
Karoq (NU) – Third brake light on when trunk is open
Purpose: to keep the 3rd brake light on if the trunk is not fully closed. For security lighting at night or to...
Karoq (NU) – Trailer Assist activation
Purpose: to activate Trailer Assist, which takes control of steering when the trailer is attached. Trailer direction is determined by the mirror...
Karoq (NU) – Vehicle Hold Assist
Purpose: To set the memory of the Auto Hold button (A) - the Auto Hold function can be set to be always...
Karoq (NU) – Virtual Cockpit VRS display
Purpose: to modify and customize the Active Info Display / Virtual Cockpit with the VRS skin. Procedure: 1 - Engine off, ignition...
