Seat Exeo 3R (2008-2013)
Exeo (3R) – Activate comfort turn signals
Purpose: to activate the comfort indicators. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Exeo (3R) – Activate turn signals in US mode
Purpose: activates US indicators Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug...
Exeo (3R) – Automatic door locks
Purpose: to set automatic door locking from 15km/h. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Exeo (3R) – Automatic headlamp activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. Procedure: 1 - Engine off, ignition...
Exeo (3R) – AUX-IN socket activation (retrofit)
Purpose : to activate the AUX-IN input. After installing the jack plug on the car radio connector or a Bluetooth kit (RNS-E...
Exeo (3R) – Change RNS-E startup screen
Purpose : to change the screen display at RNS-E start-up. CAUTION (Some RNS-E settings are directly related to the selected model. It...
Exeo (3R) – Comfort closure confirmation
Purpose: Activates comfort closing confirmation. The indicators will light up (x1) when the windows and sunroof are fully closed. Procedure: 1 -...
Exeo (3R) – Coming Home duration setting
Purpose: Set the length of time the headlights remain on after the car is locked. Procedure: 1 - Engine off, ignition off,...
Exeo (3R) – Deactivate windshield washer indicator
Purpose: to deactivate the windshield washer indicator on the ODB (on-board computer). Procedure: 1 - Engine off, ignition off, connect your official...
Exeo (3R) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Exeo (3R) – Display night-light indicator on speedometer
Purpose: to display the pilot light on the counter. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Exeo (3R) – Door lock/unlock confirmation (beep)
Purpose: Enables vehicle lock/unlock confirmation with beeps. the vehicle must be equipped with the original alarm. Procedure: 1 - Engine off, ignition...
Exeo (3R) – Door lock/unlock confirmation (turn signals)
Purpose: activates confirmation of vehicle locking/unlocking with turn signals. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Exeo (3R) – Lights come on automatically when it rains
Purpose: Automatically turns on lights when it rains. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Exeo (3R) – Memory 1 on ODB of KM traveled
Purpose: Activates memory 1 for km covered, average speed, time since start... These memories will be reset after an engine shutdown lasting...
Exeo (3R) – Meter lighting
Purpose : to change the illumination of the hands and dial. Proceed : 1 - Engine off, ignition off, connect your official...
Exeo (3R) – Selective door locking/unlocking
Purpose: activates selective locking/unlocking of doors. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer,...
Exeo (3R) – Speed limit display RNS-E
Purpose : to display the speed limit on the RNS-E navigation screen. ATTENTION: requires RNS-E version 193 Procedure: 1 - Engine off,...
Exeo (3R) – Tear Wiping
Purpose: to activate the windshield wipers once more after using the windshield washer, in order to remove any remaining water from the...
