Audi Q7 4L (2005-2015) / Q7 4L Facelift (specific facelift coding at bottom of page)
Q7 (4L) – Activate battery charge status in the MMI
Purpose: Activates battery charge status in Audi MMI Basic / 2G / 3G / 3GP. Procedure: 1 - Engine off, ignition off,...
Q7 (4L) – Activate daytime running lights (DRL) on MMI
Purpose: to activate/deactivate the daytime running lights (DRL) on the MMI. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM...
Q7 (4L) – Activate DVD playback while driving (VIM)
Purpose: Allows you to remove the MMI protection and continue watching a DVD or video while driving (Video in Motion). Proceed :...
Q7 (4L) – Activate MMI 3G CD/DVD extraction
Purpose: Activates CD/DVD extraction in the DVD player. Allows you to import / copy all CD/DVD / SD card content to the...
Q7 (4L) – Activate mood lighting
Purpose: activates ambient lighting and its management via MMI. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Q7 (4L) – Automatic headlight activation from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Q7 (4L) – Automatic headlight activation in the event of rain
Purpose: to automatically turn on the lights when it's raining and the wipers have been triggered. Procedure: 1 - Engine off, ignition...
Q7 (4L) – AUX-IN activation (retrofit)
Purpose: To activate the AUX (Auxiliary) socket on the rear of the MMI 2G 3G 3GPLUS, for retrofitting to CarPlay / Android...
Q7 (4L) – Bluetooth MMI 3G activation
Purpose: to activate Bluetooth with an Audi MMI 3G. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Q7 (4L) – Change MMI 3G start logo
Purpose: to change the Splash Screen of the MMI 3G. For a custom logo see tuto: Q7 (4L) - MMI 3G/3GP custom...
Q7 (4L) – Change start logo MMI 2G
Purpose: to change the Splash Screen of the MMI 2G. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Q7 (4L) – Correction of ODB consumption display
Purpose: to correct the fuel consumption display on the on-board computer. Modification only possible on Mid/High range models. Note: modifications affect the...
Q7 (4L) – Deactivate rear wiper when reversing
Purpose: to deactivate automatic activation of the rear windshield wiper during reversing when the front windshield wipers are operating. Procedure: 1 -...
Q7 (4L) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Q7 (4L) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Q7 (4L) – Locking/unlocking confirmation (beeps)
Purpose: Used to set confirmation of door locking/unlocking with beep (alarm). the vehicle must be equipped with the original alarm. Procedure: 1...
Q7 (4L) – MMI 2G speed alert and ODB display
Purpose: Activates the display of the speed alert setting and on-board computer activation on the MMI 2G screen. Procedure: 1 - Engine...
Q7 (4L) – MMI 3G/3GP customized start logo
Purpose: To modify and/or customize the home screen logo (Custom Splash Screen) with a personalized image of the MMI 3G and 3GPLUS....
Q7 (4L) – Opening/closing windows with remote control
Purpose: to activate closing and opening of windows and sunroof with remote control. Procedure: 1 - Engine off, ignition off, connect your...
Q7 (4L) – Parking aid display on MMI
Purpose: to activate the radar display on the MMI with the Audi Parking System rear option only. Procedure: 1 - Engine off,...
Q7 (4L) – Rear lights activated with daytime running lights (DRL)
Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL). Proceed : 1 - Engine off, ignition off, connect your...
Q7 (4L) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Watch out! Depending on your calculator, select 61...
Audi Q7 4L Facelift (2009-2015)
Q7 (4L) Facelift – Lowering the passenger mirror when reversing
Purpose: automatically lowers the passenger mirror when reversing. The mirror adjustment knob must be in position“R” for the passenger mirror to lower...
Q7 (4L) Facelift – Bluetooth MMI 3GP activation
Purpose: to activate Bluetooth with an Audi MMI 3G PLUS. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Q7 (4L) Facelift – Activation of gearshift recommendation
Purpose: Activates the gearshift recommendation. The gearshift recommendation is then displayed in the lower section of the ODB. Proceed : 1 -...
Q7 (4L) Facelift – Activate stationary heater
Purpose: activates stationary heating and its management on the MMI. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Q7 (4L) Facelift – Activate MMI 3GP CD/DVD extraction
Purpose: Activates CD/DVD extraction in the DVD player. Allows you to import / copy all CD/DVD / SD card content to the...
Q7 (4L) Facelift – Activating ambient lighting
Purpose: activates ambient lighting and its management via MMI. The hidden menu must be activated (See: Activate hidden menu MMI 3GP )...
Q7 (4L) Facelift – Activate DVD playback while driving (VIM)
Purpose: Allows you to remove the MMI protection and continue watching a DVD or video while driving (Video in Motion). Proceed :...
Q7 (4L) Facelift – Activate Bluetooth audio streaming (A2DP) MMI 3GP
Purpose: Enables Bluetooth streaming audio on the MMI 3G PLUS, so you can listen to music from your A2DP-compatible audio player. ATTENTION:...
Q7 (4L) Facelift – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Q7 (4L) Facelift – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
Q7 (4L) Facelift – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Needle Sweep) Proceed : 1 - Engine off,...
Q7 (4L) Facelift – Change MMI 3GP start logo
Purpose: to change the Splash Screen of the MMI 3G PLUS. For a custom logo see tuto: Q7 (4L) - MMI 3G/3GP...
Q7 (4L) Facelift – Opening/closing windows with remote control
Purpose: to activate closing and opening of windows and sunroof with remote control. Procedure: 1 - Engine off, ignition off, connect your...
Q7 (4L) Facelift – ACC distance control in MMI
Purpose: to change the distance of the Adaptive Cruise Control (ACC) on the menu in Audi MMI 3G. Procedure: 1 - Engine...
Q7 (4L) Facelift – Headlamp washer settings
Purpose: to set the delay time before the headlamp washer emerges / the duration of the headlamp washer spray / the number...
Q7 (4L) Facelift – Remove belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Procedure: 1 - Engine...
Q7 (4L) Facelift – Oil temperature via Lap Timer
Purpose: to add oil temperature to the stopwatch menu on the ODB screen. Proceed : 1 - Engine off, ignition off, connect...
Q7 (4L) Facelift – Speed of radar deactivation (or reversing camera)
Purpose : Selects the speed at which radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
