Purpose: Used to set up selective door unlocking.
When unlocking the vehicle, only the driver’s door is unlocked. To unlock all doors, press the remote control’s unlock button twice.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
Byte 0:
Bit 0: Check “Selective Central Locking (Single Door Locking) active”.
