Purpose: To completely deactivate the Start/Stop.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 (via temperature) :
3 – Click on“Select”, then click on“19 – CAN Gateway”.
4 – Click on “Long Adaptation – 0A”.
5 – Select Channel“13
6 – In new value, select“D02000” (default value = 002000) then validate.
Line 2 (If line 1 didn’t work.) :
3 – Click on“Select” then click on“61 – Battery Regul.
4 – Click on “Long Adaptation – 0A”.
5 – Select Channel“15
6 – In new value, select“3D” (default value = 10) then validate.
