Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn.
Attention! There are 5 lines of coding here, see 6. (After coding, activate the option on your screen if it doesn’t work, in CAR – Open/Close settings – check Acoustic Confirmation)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Akustische Rueckmeldung entriegeln”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Yes” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Akustische Rueckmeldung verriegeln”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Yes” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Akustische Rueckmeldung global”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Menuesteuerung Akustische Rueckmeldung”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Dauer der Akustischen Rueckmeldung vom Einfachhorn”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose“normal” or“kurz” (for a short signal), then confirm.
!!! If your vehicle is not equipped with the alarm, here is the coding to modify to activate the horn :
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Acknowledgement signals-Akustische Rueckmeldung Signalhorn”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“active” and confirm.
