Purpose: to change the angle at which the wipers are positioned when in replacement mode.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Service Position”.
7 – On the same page is a second drop-down menu, but at the bottom
of the page.
On this, select the desired angle value. Default:“170.49°” then validate.