Purpose: to set automatic door unlocking when the ignition key is removed.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “46 – Comfort Module”.
4 – Click on “Adaptation – 10”.
Canal 05
Set value to 1
Line 2:
If the adaptation channel is not activated.
3 – Click on“Select”, then click on“46 – Comfort module”.
4 – Click on“Coding – 07” then on “Long Coding Helper”.
Byte 0:
Bit 3 : Check “Auto-Unlock (unlocking after removing key from ignition)”.
