Purpose: to display oil temperature on the ODB (on-board computer). (For 2010/early 2011 models)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“17 – Instruments”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose Channel 07:“Konfiguration des Fahrerinformationssysyems-Öltemperatur”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Active” and confirm.