Purpose: Enables vehicle lock/unlock confirmation with beeps.
the vehicle must be equipped with the original alarm.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition, then run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “46 – Module Confort” . 2 – Switch on the ignition and run the VCDS program. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
4 – Click on “Coding 07”.
5 – Select Byte 1:
Bit 2: Check “Anti-Theft-System: Horn Confirmation active”.
Line 2:
3 – Click on “Select”, then click on “46 – Module Confort”.
4 – Click on “Adaptation – 10” .
5 – Select Canal 63:
Add 04 to the value