Purpose: to activate and set the number of flashes for the “Comfort flashing” option.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding – 07”.
5 – Select Byte 4:
Bit 3: Check the “Comfort/Tip Blinking” box
Line 2:
3 – Click on“Select” then click on“09 – Cent. Elect.”.
4– Click on“Adaptation – 10”.
5 – In the drop-down list, select Channel 01“Comfort Turn Signals (Cycles)”.
Choose a value between 1 and 5 for the number of flashes