Purpose: Adjusts the sensitivity of the light sensor.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “2 EPIRBs” module from the drop-down list and click on “Long coding wizard”:
Byte 2:
Bits 0-7 (187, 205 or 237 to increase sensitivity, or 45, 40 or 33 to decrease sensitivity)
