VW Touareg 3 (CR) (2018+ )
Touareg 3 (CR) – 120 km/h overtaking alert
Purpose: To activate or deactivate a message reminding you that you are exceeding the 120km/h speed limit. Procedure: 1 - Engine off,...
Touareg 3 (CR) – ACC distance setting in MMI
Purpose: Displays the Adaptive Cruise Control (ACC) distance setting on the MMI MIB2. Procedure: 1 - Engine off, ignition off, connect your...
Touareg 3 (CR) – ACC driving profile selection on the MMI
Purpose: Activates the menu for manual selection of the Adaptive Cruise Control (ACC) driving program on the MMI. Low/Standard/Dynamic driving program selection....
Touareg 3 (CR) – Activate G-Meter
Purpose: Adds the G-Meter (Accelerometer) to the Virtual Cockpit screen. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Touareg 3 (CR) – Activate Lane Assist memory function
Purpose: to store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next...
Touareg 3 (CR) – Activate lock with engine running
Purpose: locks the vehicle while the engine is running. This is useful for warming up the car, for example, in complete safety....
Touareg 3 (CR) – Activate Power/Torque
Purpose: Adds Boost/Torque to the Virtual Cockpit screen. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Touareg 3 (CR) – Activate Traffic Jam Assist
Purpose: activates the Traffic Jam Assist (TJA) (for vehicles equipped with Pre-Sense). The Traffic Jam Assistant can take over steering at speeds...
Touareg 3 (CR) – Activate/deactivate daytime running lights (DRL) with MMI
Purpose: to activate/deactivate the daytime running lights (DRL) from the MMI. ATTENTION to your country's regulations and technical inspection for daytime running...
Touareg 3 (CR) – Activating a second phone via Bluetooth
Purpose: Allows two Bluetooth phones to be connected simultaneously to the MMI. Procedure: 1 - Engine off, ignition off, connect your official...
Touareg 3 (CR) – Activating the automatic parking brake
Purpose: to activate the automatic parking brake function. When the vehicle is parked, the parking brake is automatically applied, so you no...
Touareg 3 (CR) – Adjusting the Soundaktor volume
Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...
Touareg 3 (CR) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Touareg 3 (CR) – Configuring automatic locking in the MMI
Purpose: Activates the menu entry for using the lock function when driving via the MMI. By default, the vehicle locks the central...
Touareg 3 (CR) – Daytime running light deactivation (DRL) with handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake (Park EPB). Proceed : 1 - Engine off, ignition off, connect...
Touareg 3 (CR) – Deactivate automatic activation of front parking aid
Purpose: deactivates automatic activation of front parking aid (PDC) Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable...
Touareg 3 (CR) – Delete belt alarm
Purpose: to suppress the audible alarm and warning light in the Virtual Cockpit when driving without a seatbelt. Proceed : 1 -...
Touareg 3 (CR) – Delete power tailgate beeps
Purpose: to deactivate beeps when opening/closing the trunk/electric liftgate. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Touareg 3 (CR) – Disable AM frequency on MMI
Purpose: to deactivate the AM radio frequency on the MMI (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1...
Touareg 3 (CR) – Disabling Start & Stop
Purpose: to disable Start and Stop operation. Information: Start/Stop is inactive as long as the air-conditioning control is “on”. As soon as...
Touareg 3 (CR) – Easy Entry
Purpose: to activate the “Easy Entry” function for the driver's seat. By default, vehicles equipped with the electric steering column option automatically...
Touareg 3 (CR) – Electric tailgate delay setting with remote control
Purpose: Allows you to set the activation time for tailgate operation when you hold down the center button on the key and...
Touareg 3 (CR) – Enable MMI CD/DVD extraction
Purpose: activates the function for copying multimedia data (music, films, etc.), similar to the SD card function. Allows you to import/copy/load all...
Touareg 3 (CR) – Heated seat settings
Purpose: Used to adjust the seat heating temperature, you can increase or decrease the heating level of all or part of the...
Touareg 3 (CR) – Heated steering wheel settings
Purpose: Allows you to adjust the temperature of the steering wheel heater, you can increase or decrease the heating level of all...
Touareg 3 (CR) – Lane Assist activation
Purpose: to activate Lane Assist (for vehicles equipped with Pre-Sense). Active Lane Assist can only be coded to “always on” without a...
Touareg 3 (CR) – Lane Assist settings
Purpose: Adjusts the lane departure warning's deactivation threshold for driver inactivity, the intensity of steering assistance, and the intensity of Audi Lane...
Touareg 3 (CR) – Lap Timer
Purpose: to add the stopwatch to the ODB/Virtual Cockpit. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Touareg 3 (CR) – Light Assist always active
Purpose: automatically activates the high beam assistant on start-up if it was active before the ignition was switched off. Proceed : 1...
Touareg 3 (CR) – Locking/unlocking confirmation (Beeps)
Purpose: Enables vehicle lock/unlock confirmation with beeps. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the...
Touareg 3 (CR) – Locking/unlocking confirmation (Turn signals)
Purpose: Allows you to change the vehicle lock/unlock confirmation with the number of indicators. Procedure: 1 - Engine off, ignition off, connect...
Touareg 3 (CR) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Works with Virtual Cockpit) (Needle Sweep) Proceed :...
Touareg 3 (CR) – Radar deactivation speed (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
Touareg 3 (CR) – Rear lights activated with daytime running lights (DRL)
Purpose: to activate rear lights activated with daytime running lights (Scandinavian DRL). Proceed : 1 - Engine off, ignition off, connect your...
Touareg 3 (CR) – Reprogramming a new battery
Purpose: to reprogram / recode the new battery of all its data after replacement. Watch out! There are 4 lines of coding...
Touareg 3 (CR) – Ventilated seat settings
Purpose: Allows you to fine-tune seat ventilation, you can increase or decrease all respective seat ventilation levels by up to 10% compared...
Touareg 3 (CR) – Virtual Cockpit panel display
Purpose: displays speed limit signs in the Virtual Cockpit (Sign Assist). The vehicle must be equipped with Lane Assist. Warning! There are...
Touareg 3 (CR) – Wireless CarPlay activation
Purpose: Enables Apple CarPlay Wireless and Google Android Auto Wireless to be activated without the need for a USB cable. The vehicle...