Purpose: to set the rear lights to switch off when the blinker is on and to switch on again when the indicator is off (alternately on each blinker flash cycle).
Warning! There are 8 lines of coding to do here. Save your original coding.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte16BLK SLB35BLK SL KC9 – Lichtfunktion G 16”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Blinken rechts Hellphase” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte16SL HLC10 – Dimming Direction GH 16”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“Minimize” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte17TFL R BLK SRB3TFL R BLK SR KC3 – Lichtfunktion G 17”.
7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, select“Blinken links Hellphase” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte17SL HLC10 – Dimming Direction GH 17”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “Minimize”.Minimize“and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte23SL HLC10 – Lichtfunktion G 23”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select “Blinken links Hellphase”.Blinken links Hellphase“then confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte23SL HLC10 – Dimming Direction GH 23”.
7 – On this same page is a second drop-down menu, but at the bottom
of the page.
On this menu, select“Minimize” and confirm.
Line 7:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte24SL HRA65 – Lichtfunktion G 24”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Blinken rechts Hellphase” and confirm.
Line 8:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte24SL HRA65 – Dimming Direction GH 24”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select “Minimize”.Minimize“and confirm.
