Purpose: automatically lowers the passenger mirror when reversing.
The mirror adjustment knob must be in position“R” and the function must be activated on Discover, for the passenger mirror to lower automatically.
Watch out! There are 3 lines of coding to do here.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“52 – Passenger door”.
4 – Click on“Coding – 07” then click on“Long Coding Helper”.
5 – Select byte“4”
Then check Bit“2”:“Reserve Gear Mirror Dipping active”
and Bit“3”:“Position Memory for Reserve Gear Mirror Dipping active”.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access Control 2-Spieglelabsenkung bei Rueckwaertsfahrt”.
7 – On the same page, there’s a second drop-down menu at the bottom of the page.
Select“active” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access Control 2-Menuesteuerung Spieglelabsenkung”.
7 – On the same page, there’s a second drop-down menu at the bottom of the page.
Select“active” and confirm.
