Purpose: to ensure that when a door is opened on the left, the fog lamp on the left lights up and vice versa.
Watch out! There are 4 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB45-Lichtfunktion F 12”.
7 – On this same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Tuerausstiegslicht links” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB5-Lichtfunktion F 13”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select“Tuerausstiegslicht rechts” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB45-Dimmwert EF 12”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB5-Dimmwert EF 13”“
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose between“0” and“100”, then confirm.
