Purpose: to set the number of flashes for the “Comfort flashing” option.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347” or“48396”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Turn signal control-Komfortblinken Blinkzyklen”.
7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, choose between“3” and“5” and confirm.
Information: If, after coding, the number of flashes has not changed, on your MIB screen: CAR -> Settings -> Factory settings -> Lighting (Your interior lighting configurations will also be reset).