Purpose: automatically unlocks all doors when the DSG automatic gearbox is shifted to “P”.
Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
3 – Click on “Select” then click on “09 – Cent. Elect.”.
4 – Click on “Security Access – 16” then enter the code “31347” or “48396”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “Access control – Autounlock NAR”.
7 – On this same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose “active”, then confirm.
