Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual).
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“44 – Steering Assistance”.
4 – Click on“Security Access – 16” then enter the code“19249”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Commutation profil de conduite” /“Driving profile switchover”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose the value: “directly: controlled by threshold value” / “Direct controlled over threshold value” then confirm.
