Purpose : to display the speed limit on the RNS 510 navigation screen.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select” then click on“37 – Navigation”.
4 – Click on“Coding 07”. Then “Long Coding Helper”.
5 – Select Byte 7
Activate Bit 2: Speed Threshold for Destination Input active
+ use voice command to activate Bit 3: Speed Threshold for Speech Destination Input active
