Purpose: to deactivate the fog lamps when the high beam is switched on, so that they don’t go out when the high beam is switched on. (After 2010)
Procedure :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
Byte 14: Deactivate Bit 2 “Fog Lights inactive with High Beams active”
