Purpose: Enables door lighting to be activated after retrofitting.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1 :
3 – Click on “Select”, then click on “42 – Driver’s door”.
4 – Click on “Coding 07”.
5 – Add 64 to the existing coding.
Repeat for “52 – Passenger door”.
Connection :
The cables must be connected to the 32-pin B connector on the door.
Pin 18 → Red [+12V]
Pin 19 → Brown [- Ground]
