Purpose: Allows fog lamps to be used in addition to high beam.
Watch out! There are 4 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB40-Lichtfunktion C 12”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Lichthupe generell” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte12NL LB40-DimmwertCD12”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“100” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB3-Lichtfunktion C 13”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“Lichthupe generell” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte13NL RB3-DimmwertCD13”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“100” and confirm.
INFO: Impossible coding with a Polo 6 without AB!
