Purpose: activates US turn signals in rear-view mirrors.
Watch out! Here, there are 6 lines of coding to be seen 10. Save your original coding.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 16BLK SLC11-Light_Function_C_16”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “Daytime running lights”.Daytime running lights“then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte17 BLK SR A72-Light_Function_C_17”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select “Daytime running lights”.Daytime running lights“then confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte 16BLK SLC11-Dimming_CD_16”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (light illumination between 0 and 100%)
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte1BLK VRB20-Lichtfunktion D 1”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm. (light illumination between 0 and 100%)
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte16BLK SLC11-Light_Function_E_16”.
7 – On the same page is a second drop-down menu, but at the bottom
of the page.
On this, select “Blinken links Dunkelphase” and confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte16BLK SLC11-Dimming_Direction_EF_16”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select “minimize” and confirm.
Line 7:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte17 BLK SR A72-Light_Function_E_17”.
7 – On the same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “Blinken rechts Dunkelphase”.Blinken rechts Dunkelphase“and confirm.
Line 8:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte17 BLK SR A72-Dimming_Direction_EF_17”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “minimize” then validate.
