Purpose: to activate or deactivate the 2-cylinder mode message on the on-board computer for vehicles equipped with the cylinder deactivation option (1.4 TSI ACT).
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “17 – Instruments”.
4 – Click on“Adaptation – 10”.
5 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Cylinder shut-off” / “désactivation des cylindres”.
6 – On the same page, there’s a second drop-down menu at the bottom of the page.
Select“Display” or “ No Display” and confirm.
