VW Polo 5 MK5 (6C) Facelift (2014-2017) / Polo 5 6C GTI
Polo 5 (6C) – 2-cylinder mode displayed on ODB
Purpose: to activate or deactivate the 2-cylinder mode message on the on-board computer for vehicles equipped with the cylinder deactivation option (1.4...
Polo 5 (6C) – Activate “Think Blue Monitor” mode on Discover V2
Purpose: Displays the “Think Blue Monitor” mode: “ECO MODE” graph for MIB2. Warning! There are 2 lines of coding to do here....
Polo 5 (6C) – Activate daytime running lights (DRL) only in Auto position
Purpose: to activate daytime running lights (DRL) only when the headlight control knob is in the auto position. Proceed : 1 -...
Polo 5 (6C) – Activate Driving School mode
Purpose: Adds a driving-school mode view to Discover or RCD 210, RCD 310, displaying turn signals, speed ... (also ideal for accompanied...
Polo 5 (6C) – Activate fog lamps as daytime running lights (DRL)
Purpose: to activate daytime running lights (DRL) with fog lamps. Warning! There are 2 lines of coding to do here. Proceed :...
Polo 5 (6C) – Activate intruder alarm with horn
Purpose: to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the door if it...
Polo 5 (6C) – Activate Off-Road mode on Discover V2
Purpose: to add Offroad mode to Discover Pro V2 or Discover Media V2 with navigation. Warning! There are 3 lines of coding...
Polo 5 (6C) – Activate/deactivate windshield wipers on key removal
Purpose: to activate windshield wiper stop when the key is removed (wipers stop directly in the position they were in) or to...
Polo 5 (6C) – Activation of progressive interior lighting
Purpose: turns interior lights (door knobs, dashboard, center console) on and off gradually. By default, interior lights are switched on and off...
Polo 5 (6C) – Adjusting the Soundaktor volume
Purpose: to adjust/deactivate the volume of the Soundaktor (speaker built into the windscreen bay to simulate a false engine noise). If you...
Polo 5 (6C) – Air conditioning LED intensity adjustment
Purpose: to customize the illumination intensity of the air-conditioning indicators. Warning! There are 3 lines of coding to do here. Proceed :1...
Polo 5 (6C) – Automatic headlamps from 140 km/h
Purpose: to automatically switch on the lights when the vehicle is travelling at over 140 km/h. (The lights will automatically go out...
Polo 5 (6C) – Automatically folding mirrors
Purpose: Automatically folds mirrors when vehicle is locked. The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)”...
Polo 5 (6C) – Change Discover start logo
Purpose: Allows you to display another logo at launch, and a color to match the finish of your Discover Média or Pro....
Polo 5 (6C) – Comfort turn signal
Purpose: to set the number of flashes for the “Comfort flashing” option. Proceed : 1 - Engine off, ignition off, connect your...
Polo 5 (6C) – Coming / Leaving Home with fog lamps
Purpose: To use the fog lamps for Coming Home and Leaving Home. Proceed : 1 - Engine off, ignition off, connect your...
Polo 5 (6C) – Coming / Leaving Home with fog lamps, Xenon and LEDs
Goal: Add fog lamps for Coming Home and Leaving Home in addition to LEDs and Xenon. Warning! There are 5 lines of...
Polo 5 (6C) – Coming / Leaving Home without light sensor
Purpose: to activate Coming / Leaving Home without the light sensor. Warning! There are 5 lines of coding to do here. Proceed...
Polo 5 (6C) – Coming Home automatic
Purpose: Automatically activates the Coming Home function (no need to make a headlight call). Proceed : 1 - Engine off, ignition off,...
Polo 5 (6C) – Coming Home on opening the driver’s door
Purpose: Starts Coming Home when the driver's door is opened, not when the ignition key is removed. Proceed : 1 - Engine...
Polo 5 (6C) – Compass display on ODB
Purpose: to display a compass on the ODB (on-board computer), if you have GPS navigation (NAV), and to change its position on...
Polo 5 (6C) – Corner lights activation
Purpose: to activate Corner Lights with fog lamps. Warning! There are 6 lines of coding to do here. Proceed : 1 -...
Polo 5 (6C) – Corner Lights with turn signals
Purpose: to activate the Corner Lights on the side where the flasher is activated. Proceed : 1 - Engine off, ignition off,...
Polo 5 (6C) – Daytime running light deactivation (DRL) with handbrake
Purpose: to deactivate the daytime running lights (DRL) using the handbrake. Proceed : 1 - Engine off, ignition off, connect your official...
Polo 5 (6C) – Daytime running lights (DRL) on/off with Discover
Purpose: to activate/deactivate the daytime running lights (DRL) from Discover. ATTENTION to your country's regulations and technical inspection for daytime running lights!However,...
Polo 5 (6C) – Deactivate brake pad warning light
Purpose: to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no sensor...
Polo 5 (6C) – Deactivate horn without ignition
Purpose: deactivates or activates the horn when the ignition is off. Proceed : 1 - Engine off, ignition off, connect your official...
Polo 5 (6C) – Deactivate MirrorLink
Purpose: To deactivate / remove MirrorLink from App-Connect on the Discover MIB. The Mirrorlink service is no longer available since June 1,...
Polo 5 (6C) – Deactivate open door alarm with contact
Purpose: to deactivate the alarm which is triggered when the door is opened and the contact is in position P. Proceed :...
Polo 5 (6C) – Deactivate rear fog light warning
Purpose: to deactivate the warning message on the dashboard, which will remind you to turn on the rear fog lights when you...
Polo 5 (6C) – Deactivation of parking aid activation beep
Purpose: to deactivate the beep when reverse gear is engaged or when parking assistance is activated manually. Procedure: 1 - Engine off,...
Polo 5 (6C) – Delete belt alarm
Purpose: To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1 -...
Polo 5 (6C) – Disable AM frequency on Discover
Purpose: to disable the AM radio frequency on Discover (AM radio frequency is rarely used, unlike FM radio frequency). Procedure: 1 -...
Polo 5 (6C) – Disable OPS warning message
Purpose: To deactivate the “Check Distance!” / “Please check surroundings” / “Look! Safe to move?” message which appears on Discover when parking...
Polo 5 (6C) – Door lock/unlock confirmation (beep/horn)
Purpose: to set confirmation of door locking/unlocking with beep (alarm) or horn. Attention! There are 5 lines of coding here, see 6....
Polo 5 (6C) – Electronic differential lock (XDS)
Purpose: to set the electronic differential lock (XDS) The electronic differential lock (XDS) is an extension of the well-known EDS function. XDS...
Polo 5 (6C) – Enable USB port for iPhone CarPlay (retrofit)
Purpose: to enable the USB port for iPhone CarPlay accounting (after activating App Connect and changing the USB and USB cable) for...
Polo 5 (6C) – Fan speed display for air conditioning in Auto mode
Purpose: to display fan speed when automatic air-conditioning mode is activated. (Climatronic fan speed display Auto mode) Proceed : 1 - Engine...
Polo 5 (6C) – Fender / Dynaudio logo at Discover start-up
Purpose: Displays the Fender or Dynaudio logo when your Discover Media or Pro is launched. Proceed : 1 - Engine off, ignition...
Polo 5 (6C) – Flash mode lights during emergency braking
Purpose: activates the brake/turn signal lights in flash mode during emergency braking. Procedure : 1 - Engine off, ignition off, connect your...
Polo 5 (6C) – Full sunroof opening with remote control
Purpose: Allows the sunroof to open fully when opening with the remote control. Proceed : 1 - Engine off, ignition off, connect...
Polo 5 (6C) – Headlamp call with fog lamps
Purpose: Allows fog lamps to be used in addition to high beam. Warning! There are 2 lines of coding to do here,...
Polo 5 (6C) – Headlamp washer settings (Xenon)
Purpose: to manage the number of manual activations before the headlamp washer is activated on Xenon / to set the delay time...
Polo 5 (6C) – Hill Start Assist
Purpose: to set Hill Start Assist operation. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
Polo 5 (6C) – Increase gas pedal sensitivity
Purpose: to increase accelerator pedal sensitivity. (better acceleration response with DSG, more significant than with manual). Proceed : 1 - Engine off,...
Polo 5 (6C) – Increase intensity of reversing lights
Purpose: increases the intensity of the reversing lights (useful for better visibility with the reversing camera in a garage, for example). Proceed...
Polo 5 (6C) – Key operation with ignition on
Purpose: Allows you to use the key and lock the vehicle with the ignition switched on or the engine running. (Very practical...
Polo 5 (6C) – Lap timer
Purpose: to add the stopwatch to the ODB (on-board computer). Only for vehicles with Color ODB. Proceed : 1 - Engine off,...
Polo 5 (6C) – Microphone sensitivity adjustment
Purpose: to adjust the intensity of the hands-free system's microphone. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Polo 5 (6C) – Mirror folding adjustment with remote control
Purpose: to set the mirror folding option via remote control when locking the vehicle. The vehicle must be equipped with the “Electrically...
Polo 5 (6C) – Needle check
Purpose: to activate the scanning of the speedometer needles when the car is started. (Needle Sweep) Proceed : 1 - Engine off,...
Polo 5 (6C) – ODB make-up quantity display
Purpose: to display the amount of fuel used since refuelling on the ODB (on-board computer). Proceed : 1 - Engine off, ignition...
Polo 5 (6C) – Oil temperature on ODB
Purpose: to display oil temperature on the ODB (on-board computer). Proceed : 1 - Engine off, ignition off, connect your official VAG-COM...
Polo 5 (6C) – Radar deactivation speed (or reversing camera)
Purpose: Selects the speed at which the radar and/or reversing camera are deactivated. Proceed : 1 - Engine off, ignition off, connect...
Polo 5 (6C) – Rear lights activated with daytime running lights (DRL)
Purpose: activates rear lights activated with daytime running lights (Scandinavian DRL) Attention! There are 1 or 8 lines of coding to do...
Polo 5 (6C) – Start/Stop deactivation
Purpose: to disable Start and Stop completely. Watch out! There are 1 or 2 lines of coding to do here, depending on...
Polo 5 (6C) – US flasher
Purpose: to activate US nightlights with turn signals. Warning! There are 10 lines of coding to do here. (If B36 not found,...
Polo 5 (6C) – US turn signals in rearview mirrors
Purpose: activates US turn signals in rear-view mirrors. Watch out! Here, there are 6 lines of coding to be seen 10. Save...
Polo 5 (6C) – Vehicle Hold Assist
Purpose: To set the memory of the Auto Hold button (A) - the Auto Hold function can be set to be always...