VW Polo 3 MK3 (6N) (1994-2002) / VW Polo 3 Facelift (1999-2002)
Polo 3 (6N) – Automatic door locks
Purpose : To configure automatic door locking at speeds over 15 km/h. Proceed : 1 - Engine off, ignition off, connect your...
Polo 3 (6N) – Automatic door unlocking
Purpose : to configure automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect...
Polo 3 (6N) – Confirmation of vehicle unlocking (turn signals)
Purpose : activates turn signals when vehicle is unlocked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Polo 3 (6N) – Deactivate brake pad warning light
Purpose : to deactivate the worn brake pad warning light on the ODB (on-board computer), e.g. if the brake pad has no...
Polo 3 (6N) – Delete belt alarm
Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1...
Polo 3 (6N) – Key configuration
Purpose : to configure the keys to be used with the vehicle. WARNING: This procedure does not configure keys with immobilizer. Proceed...
Polo 3 (6N) – Reset keys
Purpose: Resets the configuration of all keys. ATTENTION: No more keys will be recognized with the vehicle. Proceed : 1 - Engine...
Polo 3 (6N) – Selective unlocking / all doors
Purpose : to select the type of door opening when the remote control is pressed. Selective: one press unlocks only the driver's...
Polo 3 (6N) – Vehicle lock confirmation (beeps)
Purpose : Activates beeps when vehicle is locked. Only for vehicles with alarm(1 beep for locking) Proceed : 1 - Engine off,...
Polo 3 (6N) – Vehicle lock confirmation (turn signals)
Purpose : activates turn signals when vehicle is locked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Polo 3 (6N) – Vehicle unlocking confirmation (beeps)
Purpose : Activates beeps when vehicle is unlocked. Only for vehicles with alarm (2 beeps for unlocking) Proceed : 1 - Engine...