Purpose: Configures front indicators and LEDs (DRL) in phase opposition.
Warning! There are 6 lines of coding to do here. Save your original coding.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte2SL VLB10-Lichtfunktion G 2”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Blinken Links Hellphase” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte2SL VLB10-Dimmwert GH 2”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“0” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte2SL VLB10-Dimming Direction GH 2”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“minimize” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte3SL VRB21-Lichtfunktion G 3”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“Blinken Rechts Hellphase” and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte3SL VRB21-Dimmwert GH 3”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“0” and confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte3SL VRB21-Dimming Direction GH 3”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, select“minimize” and confirm.
