Purpose: Displays the Fender or Dynaudio logo when your Discover Media or Pro is launched.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
For MIB1 :
3 – Click on“Select” then click on“5F – Electr. information”.
4 – Click on“Security Access – 16” then enter the code“20103”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose the channel “Startup_Screen_Sticker_HMI_Fender” or “Startup_Screen_Sticker_HMI_Dynaudio”.
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this menu, choose“activated” and confirm.
For MIB2:
3 – Click on“Select” then click on“5F – Information Electr.”.
4 – Click on“Security Access – 16” then type the code“20103”
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
From this drop-down menu, select the “Startup_Screen_Sticker_HMI” channel .
7 – On this same page, there is a second drop-down menu, but at the bottom
of the page.
On this, choose“1” for Fender or“2” for Dynaudio, then confirm.
