Purpose: to configure automatic door unlocking when the ignition key is removed.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “46 – Module Confort”.
4– Click on “Adaptation – 10”.
Canal 05
Set value to 1
Line 2:
If the adaptation channel is not activated.
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Coding 07”.
5 – Select the “0” module and click on “Long Coding Helper”:
Byte 0:
Bit 3: Check “Auto-Unlock (Unlocking when Removing the Ignition Key)”.
