Purpose : Activates beeps when vehicle is locked.
Only for vehicles with alarm
(1 beep for locking)
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on “Select”, then click on “46 – Comfort Module”.
4 – Click on “Adaptation – 10”.
5 – Select Channel 07 (“Locking Confirmation (Beep)” in the drop-down list)
Set value 1
