VW New Beetle (1C/1Y/9C) New Beetle (1998-2011)
New Beetle (1C) – Automatic door locks
Purpose : To configure automatic door locking at speeds over 15 km/h. Proceed : 1 - Engine off, ignition off, connect your...
New Beetle (1C) – Automatic door unlocking
Purpose : to configure automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect...
New Beetle (1C) – Change ODB language
Purpose : To change the language of the ODB. (Highline MFA) Proceed : 1 - Engine off, ignition off, connect your official...
New Beetle (1C) – Confirmation of vehicle unlocking (Turn signal lights)
Purpose : activates turn signals when vehicle is unlocked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
New Beetle (1C) – Cruise control activation (retrofit)
Purpose: to activate the speed governor after retrofitting. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
New Beetle (1C) – Delete belt alarm
Purpose : To suppress the audible alarm and the warning light on the speedometer when driving without a seatbelt. Proceed : 1...
New Beetle (1C) – Horn setting
Purpose : Allows you to modify the type of tone and duration of the horn sound, depending on the country. Proceed :...
New Beetle (1C) – Key configuration
Purpose : to configure the keys to be used with the vehicle. WARNING: This procedure does not configure keys with immobilizer. Proceed...
New Beetle (1C) – Mirror defrost duration
Purpose: Selects the duration of mirror defrosting. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to...
New Beetle (1C) – Rear defrost duration
Purpose: Selects rear defrost duration. Procedure: 1 - Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then...
New Beetle (1C) – Reset keys
Purpose: Resets the configuration of all keys. ATTENTION: No more keys will be recognized with the vehicle. Proceed : 1 - Engine...
New Beetle (1C) – Selective unlocking / all doors
Purpose : to select the type of door opening when the remote control is pressed. Selective: one press unlocks only the driver's...
New Beetle (1C) – Vehicle lock confirmation (beeps)
Purpose : Activates beeps when vehicle is locked. Only for vehicles with alarm (1 beep for locking) Proceed : 1 - Engine...
New Beetle (1C) – Vehicle lock confirmation (turn signals)
Purpose : activates turn signals when vehicle is locked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
New Beetle (1C) – Vehicle unlocking confirmation (beeps)
Purpose : Activates beeps when vehicle is unlocked. Only for vehicles with alarm (2 beeps for unlocking) Proceed : 1 - Engine...