VW Lupo 6E (1998-2005)
Lupo (6E) – Automatic door locks
Purpose : To configure automatic door locking at speeds over 15 km/h. Proceed : 1 - Engine off, ignition off, connect your...
Lupo (6E) – Automatic door unlocking
Purpose : to configure automatic door unlocking when the ignition key is removed. Proceed : 1 - Engine off, ignition off, connect...
Lupo (6E) – Horn setting
Purpose : Allows you to modify the type of tone and duration of the horn sound, depending on the country. Proceed :...
Lupo (6E) – Key configuration
Purpose : to configure the keys to be used with the vehicle. WARNING: This procedure does not configure keys with immobilizer. Proceed...
Lupo (6E) – Reset keys
Purpose: Resets the configuration of all keys. ATTENTION: No more keys will be recognized with the vehicle. Proceed : 1 - Engine...
Lupo (6E) – Selective unlocking / all doors
Purpose : to select the type of door opening when the remote control is pressed. Selective: one press unlocks only the driver's...
Lupo (6E) – Vehicle lock confirmation (beeps)
Purpose : Activates beeps when vehicle is locked. Only for vehicles with alarm (1 beep for locking) Proceed : 1 - Engine...
Lupo (6E) – Vehicle lock confirmation (turn signals)
Purpose : activates turn signals when vehicle is locked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...
Lupo (6E) – Vehicle unlocking confirmation (beeps)
Purpose : Activates beeps when vehicle is unlocked. Only for vehicles with alarm (2 beeps for unlocking) Proceed : 1 - Engine...
Lupo (6E) – Vehicle unlocking confirmation (turn signals)
Purpose : activates turn signals when vehicle is unlocked. Proceed : 1 - Engine off, ignition off, connect your official VAG-COM VCDS...