Purpose: to adjust the sensitivity of the highway lights.
SFD: yes
Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or your OBDeleven box.
2 – Switch on the ignition and run the VCDS program or the OBDeleven application.
Line 1 (highway light activation speed):
3 – Click on “Select”, then click on “09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_on”.
7 – On this same page, you’ll find a second drop-down menu, at the bottom
of the page.
On this, choose the value for the headlight activation speed, then validate. (default: 140 km/h)
Line 2 (highway light deactivation speed):
3 – Click on “Select”, then click on “09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_v_autobahn_off”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation speed, then validate. (default: 65 km/h)
Line 3 (highway light deactivation times):
3 – Click on “Select”, then click on “09 – Cent. Elect.”.
4 – Unlock SFD protection.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “RLS_lights for autobahn – p_t_autobahn_delay_off”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this, choose the value for the headlight deactivation delay, then confirm. (default: 120 s)
