Purpose: To store the Lane Assist function in memory. If you deactivate it, the Lane Assist will not automatically resume the next time the vehicle is started.
Procedure:
1– Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or OBDeleven.
2– Switch on the ignition and run the VCDS program. or OBDeleven.
Line 1:
3 – Click on“Select” then click on “.A5 – Frt Sens. Drv. Assist“.
4 – Click on “Coding – 07” then click on“Long Coding Helper”.
5 – Select byte“09”
Then check Bit 0-1“03 Configuration_for_lane_departure_warning_Kl15, Last_setting”.