Purpose: to display another logo when your MIB3 is launched.
SFD: yes
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket or your OBDeleven box.
2 – Switch on the ignition and run the VCDS program. or the OBDeleven application. Procedure: 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
Line 1:
3 – Click on“Select” then click on“5F – Information Electr.”.
4 – Unlock the SFD protection.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, select the channel“function_configuration_hmi – screenings”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, choose the start-up logo, then confirm.
- 0 – no logo / VW
- 2 – GTD
- 3 – GTI
- 6 – R
- 7 – R-Line
- 8 – All track
Example: GTI logo
