Purpose: Allows you to adjust the lighting power of the US indicators via the ambient lighting setting in the CAR menu. (save your original coding for a reset, does not work on all models)
Watch out! There are 26 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – Modify channels :
Channel “Interior light, luminaire configuration-Ambiente_Applikationszüge_in_Instrumententafel” Set value to “built in”
Channel “Interior light, luminaire configuration ambience menu with global off” Set value to “active”
Channel “Light 0 BLK VL B36 light function A 0” Set value to “Ambient light 1”
Channel “Light 0 BLK VL B36 dimming value AB 0” Set percentage value as required
Channel “Light 0 BLK VL B36 light function C 0” set value to “handbrake is applied”
Channel “light 0 BLK VL B36 light function D 0” set value to “interior light”
Channel “light 0 BLK VL B36 dimming value CD 0” set value to “0”
Channel “lamp 0 BLK VL B36-Dimming Direction CD 0” set value to “minimize”
Channel “lamp 0 BLK VL B36 light function F 0” set value to “flashing left light phase”
Channel “lamp 0 BLK VL B36 dimming value EF 0” set value to “100”.
Channel “Luminaire 0 BLK VL B36-Dimming Direction EF 0” Set value to “maximize”.
Channel “Luminaire 0 BLK VL B36-Light function H 0” Set value to “Flashing left dark phase”.
Channel “Luminaire 0 BLK VL B36 dimming value GH 0” set value to “0”.
Channel “lamp 0 BLK VL B36-Dimming Direction GH 0” set value to “minimize”
Channel “lamp1BLK VRB20 light function A 0” set value to “ambient light 1”
Channel “Lamp1BLK VRB20 dimming value AB 0” Set percentage value as desired
Channel “Lamp1BLK VRB20 light function C 0” Set value to “Handbrake is applied”
Channel “Lamp1BLK VRB20 light function D 0” Set value to “Interior light”
Channel “Luminaire1BLK VRB20 dimming value CD 0” set value to “0”.
Channel “luminaire1BLK VRB20-dimming direction CD 0” set value to “minimize”
Channel “luminaire1BLK VRB20 light function F 1” set value to “flashing right light phase”.
Channel “luminaire1BLK VRB20 dimming value EF 1” set value to “100”
Channel “luminaire1BLK VRB20-dimming direction EF 1” set value to “maximize”
Channel “luminaire1BLK VRB20 light function H 1” set value to “Flashing right dark phase”.
Channel “Luminaire1BLK VRB20 dimming value GH 1” Set value to “0”.
Channel “Luminaire1BLK VRB20-Dimming Direction GH 1” Set value to “minimize”.
If coding is unsuccessful, “Ambientelicht 3” and “Ambiente_Applikationsträger_in_Tuertafel” may have to be used.