Purpose: Selects the speed at which the radar and/or reversing camera are deactivated.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“10 – Assistance stationnt”.
4 – Click on“Security Access – 16” then enter the code“71679”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Switch-off speed for parking assist”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose a value between“0” and“15” km/h, depending on your preference.
