Purpose: to activate the LED tail lights during the locking/unlocking phase.
Warning! There are 10 lines of coding to do here. Save your original coding.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte20BR LA71-Lichtfunktion G 20”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select“interior light” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte21BR RC8-Lichtfunktion G 21”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select“interior light” and confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte23SL HLC10-Lichtfunktion G 23”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select“interior light” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte24SL HRA65-Lichtfunktion G 24”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select“interior light” and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte27NSL RC6-Lichtfunktion G 27”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
Select“interior light” and confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte20BR LA71-Dimmwert GH 20”.
7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, enter the required value in“%” and confirm.
Line 7:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte21BR RC8-Dimmwert GH 21 ”.
7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, enter the required value in“%” and confirm.
Line 8:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte23SL HLC10-Dimmwert GH 23”.
7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, enter the required value in“%” and confirm.
Line 9:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte24SL HRA65-Dimmwert GH 24”.
7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, enter the required value in“%” and confirm.
Line 10:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte27NSL RC6-Dimmwert GH 27”.
7 – On this same page, there is a second drop-down menu, at the bottom
of the page.
On this menu, enter the required value in“%” and confirm.