Purpose: increases the intensity of the reversing lights (useful for better visibility with the reversing camera in a garage, for example).
Warning! There are 2 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte28RFL LC11-Dimmwert AB 28”.
7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select“100” for Halogens or“127” for LEDs, then confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on “Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte29RFL RA64-Dimmwert AB 29”.
7 – On this same page, there is a second drop-down menu at the bottom of the page.
On this menu, select“100” for Halogens or“127” for LEDs, then confirm.