Purpose: activates foot lighting when the ignition is off, and deactivates it if the ignition is switched on during the day or without a light sensor.
Warning! There are 2 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte2SL VLB10-LichtfunktionB30”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “Fahrzeug ist nicht fahrbereit (Motor läuft nicht; Electroantrieb nicht activ o. ä. “then validate.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte30FR LC72-Lichtfunktion B30”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose “Fahrzeug ist nicht fahrbereit (Motor läuft nicht; Electroantrieb nicht activ o. ä. “then validate.