Purpose: Deactivates the “Check SAFELOCK! Owner’s manual! Owner’s manual!” warning message when the ignition is switched off.
Please note that the doors are always locked from the inside!
Safelock is an anti-burglary system that prevents thieves from gaining access to the car. This device locks the doors, inside and out, when the driver activates the remote central locking system after leaving the vehicle.
If occupants are still inside, they cannot open the doors or even roll down the windows. The car can then become a real trap.
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
For Golf 7 phase 1:
3 – Click on“Select” then click on “.09- Cent. Elect.”.
4 – Click on“Security Access – 16” then type the code“31347”
5 – Click on“Coding – 07” then click on“Long Coding Helper”.
6 – Choose byte“08”
Then tick Bit“6”.
For Golf 7.5 Facelift :
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose “ ZV allgemein – ZV_ohne_Safe_Funktion”
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“installed” and confirm.
