Purpose: to modify the intensity of the position, daytime and parking lights (basic value:“26”).
Attention! There are 2 lines of coding here, see 6.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Method 1:
This will also influence the intensity when you put your car on the side of the road and engage the turn signal to signal your car.
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte2SL VLB10-Dimmwert CD 2”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte3SL VRB21-Dimmwert CD 3”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm.
Method 2:
To avoid changing the parking intensity and thus separating the two settings
Line 1:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte2SL VLB10-Lichtfunktion C 2”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not active” and confirm.
Line 2:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte2SL VLB10-Lichtfunktion E 2”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose“Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht” then confirm.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte2SL VLB10-Dimmwert EF 2”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte3SL VRB21- Lichtfunktion C 3”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, select“not active” and confirm.
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte3SL VRB21-Lichtfunktion E 3”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
On this, choose“Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht” then confirm.
Line 6:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Leuchte3SL VRB21-Dimmwert EF 3”.
7 – On this same page, there is a second drop-down menu at the bottom
of the page.
On this menu, choose between“0” and“100” and confirm.