Purpose: Automatically folds mirrors when vehicle is locked.
The vehicle must be equipped with the “Electrically folding mirrors (with comodo in door)” option.
Watch out! There are 5 lines of coding to do here.
Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to
the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“52 – Passenger door”.
4 – Click on“Coding – 07” then click on“Long Coding Wizard”.
5 – Select byte“4”
Then check Bit“6”:“Comfort Mirror Folding active”.
Line 2:
3 – Click on“Select”, then click on“42 – Driver’s door”.
4 – Click on“Coding – 07” then click on“Long Coding Wizard”.
5 – Select byte“4”
Then check Bit“6”:“Comfort Mirror Folding active”.
Line 3:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access Control 2-Funk Spiegelanklappen”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.
Line 4:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access Control 2-Menuesteuerung Funk Spiegel anklappen”.
7 – On the same page, there’s a second drop-down menu at the bottom
of the page.
Select“active” and confirm.
!!! Mirrors fold down without having to hold down the remote control button
Line 5:
3 – Click on“Select”, then click on“09 – Cent. Elect.”.
4 – Click on“Security Access – 16” then enter the code“31347”.
5 – Click on“Adaptation – 10”.
6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu, choose“Access Control 2-Funk Spiegelanklappung Modus”.
7 – On the same page, you’ll find a second drop-down menu at the bottom
of the page.
On this menu, select“by look command via remote control key” and confirm.