Golf 7 (5G) – Activate LED facelift taillights (7.5) on phase 1 with original LEDs (Retrofit)

Purpose: to code the original facelift LED rear lights (7.5) with scrolling blinker for a Golf 7 phase 1 with original LED lights (GTD, GTI, R, Rline …).

Coding is to be done after retrofitting LED facelift taillights (7.5). A light adapter is required for this installation! For original VW lights!


Proceed :
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.

2 – Switch on the ignition and run the VCDS program.

Line 1:

3 – Click on“Select”, then click on“09 – Cent. Elect.”.

4 – Click on“Security Access – 16” then enter the code“31347”.

5 – Click on“Adaptation – 10”.

6 – On this page, at the very top, there is a drop-down menu.
In this drop-down menu you need to change each line of the table from R_LED (phase 1) (which corresponds to the original coding of your Golf 7 phase 1 with LED lights) to LED_MK7.5DYN (phase 2) (for the new coding to operate the facelift LED lights).

Love0