Purpose : to open the tailgate automatically by remote control once the trunk release function has been activated. (Retrofit with Cylinder)
Equipment:
– 2 Skoda Fabia tailgate cylinders 6Y0 827 550 C
Note: Version A cylinders are slightly too short by 1cm and are not suitable.
– 2 Scirocco gas stops, 1K8 827 761 C (optional).
Note: For best cylinder deployment performance in cold weather, we recommend Scirocco stops. Golf stops will also work, but below 4°C, they may be more delicate to open, and therefore lose automatic mode. If you choose to keep your Golf VI stops, you don’t need to change anything.
If you have a 2010 or later chassis, no additional coding by VAG COM is necessary.
On the other hand, if you have a 2009 or earlier chassis, you must recode the 46 ECU.
Coding after assembly :
Procedure:
1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
2 – Switch on the ignition and run the VCDS program.
Line 1:
3 – Click on“Select”, then click on“46 – Comfort module”.
4 – Click on“Coding – 07” then on “Long Coding Helper”.
Byte 2:
Bit 3: Check “Central Locking (Rear Lid) Softtouch (direct open/no release)”.
Simply press the trunk button on the key for 2s.
The trunk will open automatically.
Note: Trunk closure is a little harder.